Bibliography

1. D. J. Van Zuilichem and W. Stolp in C. O'Connor, ed., Extrusion Technology for the Food Industry, Elsevier Science Publishing, New York.

2. J. D. Dziezak, "Single and Twin-Screw Extruders in Food Processing," Food Technology 43, 164-174 (1989).

3. J. M. Harper, "Food Extruders and Their Applications," in C. Mercier, P. Linko, and J. M. Harper, eds., Extrusion Cooking, AACC, St. Paul, Minn., 1989, pp. 1-5.

4. B. W. Hauck and G. R. Huber, "Single Screw vs Twin Screw Extrusion," Cereal Foods World 34, 934-939 (1989).

5. L. P. B. M. Janssen, "Engineering Aspects of Food Extrusion," in Ref. 3, pp. 17-38.

6. R. Jowitt, "The Terminology of Food Texture," Journal of Texture Studies 5, 351-358 (1974).

7. International Organization for Standardization, "Sensory Analysis Vocabulary, Part IV," Geneva, Switzerland, 1981.

8. R. H. Meyers, Response Surface Methodology, Allyn & Bacon, Boston, 1976.

9. J. M. Harper, Extrusion of Foods, Vols. 1 and 2, CRC Press, Boca Raton, Fla., 1981.

10. N. Noguchi, "Extrusion Cooking of High-Moisture Protein Foods," in Ref. 3, pp. 343-370.

11. F. F. Huang and C. K. Rha, "Protein Structures and Protein Fibers—A Review," Polymer Engineering Science 14, 81-89 (1974).

12. J. P. Clark, "Texturization by Extrusion," Journal of Texture Studies 9, 109-123 (1978).

13. D. W. Stanley and J. M. deMan, "Structural and Mechanical Properties of Textured Proteins," Journal of Texture Studies

14. J. E. Kinsella, "Texturized Proteins: Fabrication, Flavorings and Nutrition," CRC Reviews in Food Science and Nutrition

15. D. A. Ledward and J. R. Mitchell, "Protein Extrusion—More Questions Than Answers," in J. M. V. Blanshard and J. R. Mitchell, eds., Food Structure—Its Creation and Evaluation, Butterworths, Boston, 1988, pp. 219-229.

16. P. R. Sheard et al., "Macromolecular Changes Associated with the Heat Treatment of Soy Isolate," Journal of Food Technology 21, 55-60 (1986).

17. J. J. Kelley and R. Pressey, "Studies with Soybean Protein and Fiber Formation," Cereal Chemistry 43, 195-205, 1966.

18. D. B. Cumming et al., "Fate of Water Soluble Soy Protein During Thermoplastic Extrusion," Journal of Food Science 38, 320-323 (1973).

19. L. D. Burgess and D. W. Stanley. "A Possible Mechanism for Thermal Texturization of Soybean Protein," Journal of the Institute of Canadian Science and Technology—Alimentation 9, 228-231 (1976).

20. R. W. Simonsky and D. W. Stanley, "Texture-Structure Relationships in Textured Soy Protein. V. Influence of pH and Protein Acylation on Extrusion Texturization," Canadian Institute of Food Science Technology 15, 294-301 (1982).

21. D. F. Hager, "Effects of Extrusion upon Soy Concentrate Solubility," Journal of Agricultural and Food Chemistry 32, 293-296 (1984).

22. P. E. Neumann et al., "Uniquely Textured Products Obtained by Co-Extrusion of Corn Gluten Meal and Soy Flour," Cereal Chemistry 61, 439-445 (1984).

23. P. R. Sheard et al., "Role of Carbohydrates in Soya Extrusion," Journal of Food Technology 19, 475-483 (1984).

24. P. Melius, "Thermal Polymerization of Amino Acids Mixtures," Federation Proceedings, Federation of American Society of Experimental Biologist 34, 573, (1975).

25. D. B. Cummings et al., "Texture-Structure Relationships in Texturized Soy Protein. II. Textural Properties and Ultrastructure of an Extruded Soybean Product," Journal of the Institute of Canadian Science and Technology—Alimentation 5, 124-128 (1972).

26. J. M. Aguilera and F. W. Kosikowoski, "Soybean Extruded Product: A Response Surface Analysis," Journal of Food Science 41, 647-651 (1976).

27. T. J. Maurice et al., "Texture—Structure Relationship in Textured Soy Protein. III. Textural Evaluation of Extruded Products," Canadian Institute of Food Science Technology 9, 173-176 (1976).

28. T. J. Maurice and D. W. Stanley, "Texture-Structure Relationships in Texturized Soy Protein, IV. Influence of Process Variables on Extrusion Texturization," Canadian Institute of Food Science Technology 11, 1-6 (1978).

29. O. B. Smith, "Extrusion and Forming: Creating New Foods," Food Engineering 47, 48-50 (August 1975).

30. S. H. Holay and J. M. Harper, "Influence of the Extrusion Shear Environment on Plant Protein Texturization," Journal of Food Science 47, 1869-1874 (1982).

31. G. Boison et al., "Extrusion of Defatted Soy Flour-Hydrocol-loid Mixtures," Journal of Food Technology 18, 719-730 (1983).

32. P. J. Frazier et al., "Optimization of Process Variables in Extrusion Texturing of Soya," Journal of Food Engineering 2, 79-103 (1983).

33. P. R. Sheard et al., "Comparison of the Extrusion Cooking of a Soya Isolate and a Soya Flour," Journal of Food Technology 20, 763-771 (1985).

34. M. V. Taranto et al., "Textured Cottonseed and Soy Flours: A Microscopic Analysis," Journal of Food Science 43, 767771 (1978).

35. M. V. Taranto et al., "Morphological, Ultrastructural and Rheological Evaluation of Soy and Cottonseed Flours Texturized by Extrusion and Nonextrusion Processing," Journal of Food Science 43, 973-979, 984 (1978).

36. M. B. Kennedy and co-workers, "Effects of Feed Moisture and Barrel Temperature on the Rheological Properties of Extruded Cowpea Meal," Journal of Food Processing and Engineering8, 193-212(1986).

37. C. B. Pham and P. R. Del Rosario, "Studies on the Development of Texturized Vegetable Products by the Extrusion Process," Journal of Food Technology 19, 535-547 (1984).

38. J. A. Maga and K. Lorenz, "Sensory and Functional Properties of Extruded Corn-Soy Blends," Lebensmittel Wisson-schalf Technologie 11, 185-187 (1978).

39. Y. C. Jao et al., "Evaluation of Corn Protein Concentrate: Extrusion Study," Journal of Food Science 50, 1257-1259, 1288 (1985).

40. M. Bhattacharya et al., "Textural Properties of Plant Protein Blends," Journal of Food Science 51, 988-993 (1986).

41. P. Colonna and co-workers, "Extrusion Cooking of Starch and Starchy Products," in Ref. 3, pp. 247-319.

42. P. Colonna et al., "Flow, Mixing and Residence Time Distribution of Maize Starch Within a Twin Screw Extruder with a Longitudinally-Split Barrel," Journal of Cereal Science 1, 115-125 (1983).

43. C. Mercier, "Effect of Extrusion Cooking on Potato Starch Using a Twin Screw French Extruder," Staerke 29, 48-52 (1977).

44. P. Colonna and C. Mercier, "Macromolecular Modifications of Manioc Starch Components by Extrusion Cooking With and Without Lipids," Carbohydrate Polym 3, 87-108 (1983).

45. P. Colonna et al., "Extrusion Cooking and Drum Drying of Wheat Starch. I. Physical and Macromolecular Modifications," Cereal Chemistry 61, 538-543 (1984).

46. V. J. Davidson et al., "Degradation of Wheat Starch in a Single Screw Extruder: Characteristics of Extruded Starch Polymers," Journal of Food Science 49, 453-458 (1984).

47. V. J. Davidson et al., "A Model for Mechanical Degradation of Wheat Starch in a Single Screw Extruder," Journal of Food Science 49, 1154-1157 (1984).

48. L. L. Diosady et al., "Degradation of Wheat Starch in a Single Screw Extruder: Mechanico-kinetic Break Down of Cooked Starch," Journal of Food Science 50,1697-1699,1706(1985).

49. C. Mercier and P. Feillet, "Modification of Carbohydrate Components by Extrusion-Cooking of Cereal Products," Cereal Chemistry 52, 283-297 (1975).

50. J. M. Faubion and R. C. Hoseney, "High Temperature Short-Time Extrusion Cooking of Wheat Starch and Flour. I. Effect of Moisture and Flour Type on Extrudate Properties," Cereal Chemistry 59, 529-533 (1982).

51. M. Gomez and J. M. Aguilera, "A Physicochemical Model for Extrusion of Corn Starch," Journal of Food Science 49, 4043, 63 (1984).

52. J. Owusu-Ansah et al., "Textural and Microstructural Changes in Corn Starch as a Function of Extrusion Variables," Canadian Institute of Food Science Technology 17, 65-70 (1984).

53. M. Bhattacharya and M. A. Hanna, "Textural Properties of Extrusion Cooked Corn Starch," Lebensmittel Wissenschaft und Technologie 20, 195-201 (1987).

54. F. Hsieh et al., "Effects of Salt, Sugar and Screw Speed on Processing and Product Variables of Corn Meal Extruded with a Twin-Screw Extruder," Journal of Food Science 55, 224-227 (1990).

55. R. Chinnaswamy and M. A. Hanna, "Optimum Extrusion-Cooking Conditions for Maximum Expansion of Corn Starch," Journal of Food Science 53, 834-836, 840 (1988).

56. R. Chinnaswamy and M. A. Hanna, "Die-Nozzle Dimension Effects on Expansion of Corn Starch," Journal of Food Science 52, 1746-1747 (1987).

57. A. L. Hayter et al., "The Physical Properties of Extruded Food Foams," Journal of Materials Science 21, 3729-3736 (1986).

58. B. Launay and J. M. Lisch, "Twin-Screw Extrusion Cooking of Starches: Flow Behavior of Starch Pastes, Expansion and Mechanical Properties of Extrudates," Journal of Food Engineering 2, 259-280 (1983).

59. D. Paton and W. A. Spratt, "Component Interactions in the Extrusion Cooking Process. I. Processing of Chlorinated and Untreated Soft Wheat Flour," Cereal Chemistry 55,973-980 (1978).

60. J. M. Faubion and R. C. Hoseney, "High Temperature Short-Time Extrusion Cooking of Wheat Starch and Flour. II. Effect of Protein and Lipid on Extrudate Properties," Cereal Chemistry 59, 533-537 (1982).

61. M. Bhattacharya and M. A. Hanna, "Effect of Lipids on the Properties of Extruded Products," Journal of Food Science 53, 1230-1231 (1988).

62. R. A. Anderson et al., "Gelatinization of Corn Grits by Roll and Extrusion Cooking," Cereal Science Today 14, 4-7, 1112 (1969).

63. R. A. Anderson et al., "Roll and Extrusion Cooking of Grain Sorghum Grits," Cereal Science Today 14, 372-376 (1969).

64. H. F. Conway, "Extrusion Cooking of Cereals and Soybeans," Food Product Development 5, 14-17, 27-29 (1971).

65. S. Middleman, "Advances in Polymer Science and Engineering: Application to Food Rheology," in C. K. Rha, ed., Theory, Determination and Control of Physical Properties of Food Materials, Riedel Publishing, Dordrecht, Holland, 1975, pp. 39-53.

66. J. L. Leblanc, "Recent Progress in Understanding Rubber Processing Through a Rheological Approach," Progress and Trends in Rheology 2, 32-43 (1988).

67. C. J. S. Petrie, "Some Asymptotic Results for Planar Extension," Journal of Non-Newtonian Fluid Mechanics 34,37-62 (1990).

68. J. M. Harper et al., "Viscosity Model for Cooked Cereal Doughs," American Institute of Chemical Engineering Symposium Series, No. 108, 67, 40-43 (1971).

69. C. H. Remsen and J. P. Clark, "A Viscosity Model for a Cooking Dough," Journals of Food Process Engineering 2, 39-63 (1977).

70. N. W. Cervone and J. M. Harper, "Viscosity of an Intermediate Moisture Dough," Journal of Food Processing Engineering 2, 83-95 (1978).

71. Y. C. Jao et al., "Engineering Analysis of Soy Dough Rheology in Extrusion," Journal of Food Process Engineering 2, 97112 (1978).

72. L. A. Luxenburg et al., "Background Studies in the Modeling of Extrusion Cooking Processes for Soy Doughs," Biotechnology Progress 1, 33-38 (1985).

73. A. Senouci and A. C. Smith, "An Experimental Study of Food Melt Rheology. I. Shear Viscosity Using a Slit Die Viscometer and a Capillary Rheometer," Rheologica Acta 27, 546—554 (1988).

74. L. S. Lai et al., "On Line Rheological Properties of Amylose and Amylopectin Based Starch. The Role of Viscosity on Extrudate Expansion," Proceedings of the Xth International Congress on Rheology 2, 55-57, (1988).

75. M. Padmanabhan and M. Bhattacharya, "Analysis of Pressure Drop in Extruder Dies," Journal of Food Science 54, 709-713 (1989).

76. M. Bhattacharya and M. Padmanabhan, "Elongational Viscosity During Extrusion Cooking Using a Converging Flow Analysis," Paper 243, Presented at the Institute of Food Technology Annual Meeting, Anaheim, Calif., 1990.

77. E. B. Bagley, "End Corrections in the Capillary Flow of Polyethylene," Journal of Applied Physics 28, 624-627 (1957).

78. B. Vergnes and J. P. Villemaire, "Rheological Behavior of Low Moisture Molten Maize Starch," Rheologica Acta 26, 570576 (1987).

79. R. G. Morgan et al., "A Generalized Viscosity Model for Extrusion of Protein Doughs," Journal of Food Process Engineering 11, 55-78 (1989).

80. K. L. Mackey et al., "Rheological Modeling of Potato Flours During Extrusion Cooking," Journal of Food Process Engineering 12, 1-11 (1989).

81. G. V. Vinogradov and A. Y. Malkin, Rheology of Polymers, Mir Publishers, Moscow, 1980.

82. B. van Lengerich, "Influence of Extrusion Processing on InLine Rheological Behavior, Structure, and Function of Wheat Starch," in H. Faridi and J. M. Faubion, eds., Dough Rheology and Baked Product Texture, Van Nostrand Reinhold, New York, 1989, pp. 421-471.

83. J. L. Doublier et al., "Extrusion Cooking and Drum-Drying of Wheat Starch. II. Rheological Characterization of Wheat Starch," Cereal Chemistry 63, 240-246 (1986).

84. B. Launay and T. Kone, "Twin-Screw Extrusion Cooking of Corn Starch: Flow Behavior of Starch Pastes," in P. Zeuthen et al., eds., Thermal Processing and Quality of Foods, Elsevier Applied Science, London, 1984, pp. 54-61.

85. R. B. Bird and co-workers, Dynamics of Polymeric Liquids, Vol. 1, John Wiley & Sons, New York, 1987.

86. H. A. Barnes et al., An Introduction to Rheology, Elsevier Science Publishing, Amsterdam, The Netherlands, 1989.

87. C. D. Han, Rheology in Polymer Processing, Academic Press, New York, 1976.

88. C. D. Han, "Slit Rheometry," in A. A. Collyer and D. W. Clegg, eds., Rheological Measurement, Elsevier Applied Science, New York, 1988, pp. 25-48.

89. D. V. Boger and M. M. Denn, "Capillary and Slit Methods of Normal Stress Measurements," Journal of Non-Newtonian Fluid Mechanics 6, 163-185 (1980).

90. A. S. Lodge and L. de Vargas, "Positive Hold Pressures and Negative Exit Pressures Generated by Molten Polyethylene Flowing Through a Slit Die," Rheologica Acta 22, 151-170 (1983).

91. C. Rauwendaal and F. Fernandez, "Experimental Study and Analysis of a Slit Die Viscometer," Polymer Engineering Science 25, 765-771 (1985).

92. R. Eswaran et al., "A Slit Viscometer for Polymer Melts," Rheologica Acta 3, 83-91 (1963).

93. J. L. Leblanc, "New Slit Die Rheometer. Some Results with a Butadiene-Styrene Block Copolymer," Polymer 17, 235240, (1976).

94. L. Choplin and P. J. Carreau, "Excess Pressure Losses in Slit," Journal of Non-Newtonian Fluid Mechanics 9,119-146 (1981).

95. H. M. Laun, "Polymer Melt Rheology with a Slit Die," Rheologica Acta 22, 171-185 (1983).

96. D. G. Baird et al., "Comparison of the Hole Pressure and Exit Pressure Methods for Measuring Polymer Melt Normal Stresses," Polymer Engineering Science 26, 225-232 (1986).

97. N. Y. Tuna and B. A. Finlayson, "Exit Pressure Experiments for Low Density Polyethylene Melts," Journal of Rheology 32, 285-308 (1988).

98. A. Senouci and A. C. Smith, "An Experimental Study of Food Melt Rheology. II. End Pressure EffectsRheologica Acta 27, 649-655 (1988).

99. M. Bhattacharya and M. Padmanabhan, "On-line Rheological Measurements of Food Dough During Extrusion Cooking," in Proceedings of the Second International Conference in Extrusion and Rheology of Foods. Rutgers University, New Brunswick, N.J., 1990.

100. R. C. E. Guy and A. W. Home, "Extrusion and Co-Extrusion of Cereals," in Ref. 15, pp. 331-349.

101. B. A. Whipple and C. T. Hill, "Velocity Distributions in Die Swell," American Institute of Chemical Engineering Journal 24, 664-678 (1978).

102. M. Gottleib and R. B. Bird, "Exit Effects in Non-Newtonian Liquids. An Experimental Study," Ind. Eng. Chem. Fund. 18, 357-368 (1979).

103. J. M. Broadbent et al., "Possible Systematic Errors in the Measurement of Normal Stress Differences in Polymer Solution in Steady Shear Flow," Nature 217, 55-57 (1968).

104. A. Kaye et al., "Determination of Normal Stress Differences in Steady Shear Flow. II. Flow Birefringence, Viscosity and Normal Stress Data for Polyisobutene Liquid," Rheologica Acta 7, 368-379 (1968).

105. R. I. Tanner and A. C. Pipkin, "Intrinsic Errors in Pressure-Hole Measurement," Transactions of the Society of Rheology 13, 471-484 (1969).

106. A. S. Lodge, "Low-Shear Rate Rheometry and Polymer Quality Control," Chemical Engineering Communications 32, 160 (1985).

107. A. S. Lodge, "A New Method of Measuring Multigrade Oil Shear Elasticity and Viscosity at High Shear Rates," SAE Technical Paper, Series 872043 (1987).

108. A. S. Lodge et al., "Measurement of the First Normal-Stress Difference at High Shear Rates for a Polyisobutylene/De-calin Solution D2," Rheologica Acta 26, 516-521 (1987).

109. D. G. Baird, "A Possible Method for Determining Normal Stress Differences from Hole Pressure Error Data," Transactions of the Society of Rheology 19, 147-151 (1975).

110. D. G. Baird, "Fluid Elasticity from Hole Pressure Error Data," Journal of Applied Polymer Science 20, 3155-3173 (1976).

111. R. D. Pike and D. G. Baird, "Evaluation of the Highashitani and Pritchard Analysis of the Hole Pressure Using Flow Birefringence," Journal of Non-Newtonian Fluid Mechanics 16, 211-231 (1984).

112. K. Higashitani and W. G. Pritchard, "A Kinematic Calculation of Intrinsic Errors in Pressure Measurements Made with Hole," Transactions of the Society of Rheology 16, 687696 (1972).

113. R. I. Tanner, "Pressure-Hole Errors—An Alternative Approach," Journal of Non-Newtonian Fluid Mechanics 28, 309-318 (1988).

114. M. Yao and D. S. Malkus, "Error Cancellation in HPBL Derivation of Elastic Hole-Pressure Error," Center of the Mathematical Science, Technical Summary Report 90-18, University of Wisconsin, Madison (1989).

115. W. PhilippofF and F. H. Gaskins, "The Capillary Experiment in Rheology," Transactions of the Society of Rheology 2, 263284 (1958).

116. S. A. White and D. G. Baird, "The Importance of Extensional Flow Properties on Planar Entry Flow Patterns of Polymer Melt," Journal of Non-Newtonian Fluid Mechanics 20, 93101 (1986).

117. F. N. Cogswell, "Converging Flow of Polymer Melts in Extrusion Dies," Polymer Engineering and Science 12, 64-73 (1972).

118. D. R. Oliver, "The Prediction of Angle of Convergence for the Flow ofViscoelastic Liquids into Orifices," The Chemical Engineering Journal 6, 265-271 (1973).

119. A. B. Metzner and A. P. Metzner, "Stress Levels in Rapid Extensional Flows of Polymeric Fluids," Rheologica Acta 9, 174-181 (1970).

120. A. G. Gibson "Converging Flow Analysis," in Ref. 88, pp. 4982.

121. D. M. Binding, "An Approximate Analysis for Contraction and Converging Flows," Journal of Non-Newtonian Fluid Mechanics 27, 173-189 (1988).

122. D. M. Binding and K Walters, "On the Use of Flow Through a Contraction in Estimating the Extensional Viscosity of Mobile Polymer Solution," Journal of Non-Newtonian Fluid Mechanics 30, 233-250 (1988).

123. D. M. Binding and D. M. Jones, "On the Interpretation of Data from Converging Flow Rheometers," Rheologica Acta 28, 215-222 (1989).

124. A. Senouci et al., "Extensional Rheology in Food Processing," Progress and Trends in Rheology 2, 434-437 (1988).

125. R. N. Shroff et al., "Extensional Flow of Polymer Melts," Transactions of the Society Rheology 21, 429-446 (1977).

126. H. M. Laun and H. Schuch, "Transient Elongational Viscosities and Drawability of Polymer Melts," Journal of Rheology 33, 119-175 (1989).

127. J. F. Steffe and R. G. Morgan, "On-Line Measurements of Dynamic Rheological Properties During Food Extrusion," Journal of Food Process Engineering 10, 21-26 (1987).

128. M. Padmanabhan and M. Bhattacharya, "Extrudate Expansion During Extrusion Cooking of Foods," Cereal Foods World 34, 945-949 (1989).

129. R. I. Tanner, "A Theory of Die Swell," Journal of Applied Polymer Science A-2, 8, 2067-2078 (1970).

130. R. C. Miller, "Low Moisture Extrusion: Effect of Cooking Moisture on Product Characteristics," Journal of Food Science 50, 249-253 (1985).

131. L. Alvarez-Martinez et al., "A General Model for Expansion of Extruded Products," Journal of Food Science 53, 609-615 (1988).

132. R. Chinnaswamy and M. A. Hanna, "Relationship Between Viscosity and Expansion Properties of Variously Extrusion-Cooked Corn Grain Components," Food Hydrocolloids 3, 423—434 (1990).

133. K. B. Park, "Elucidation of the Extrusion Puffing Process," Ph.D. Thesis, Department of Food Science, University of Illinois, Urbana, II., 1976.

134. S. Richardson, "The Die Swell Phenomenon," Rheologica Acta 9, 193-199 (1970).

135. R. J. Tanner, "Recoverable Elastic Strain and Swelling Ratio," in Ref. 88, pp. 93-117.

136. B. Vergnes et al., "Interrelationships Between Thermome-chanical Treatment and Macromolecular Degradation of Maize Starch in a Novel Rheometer with Preshearing,"e/oar-nal of Cereal Science 5, 189-202 (1987).

Living Gluten Free

Living Gluten Free

A beginners guide that will reveal how living "G" free can help you lose weight today! This is not a fad diet, or short term weight loss program that sometimes makes you worse off than before you started. This is a necessity for some people and is prescribed to 1 out of every 100 people on earth by doctors and health professionals.

Get My Free Ebook


Post a comment